Máy phát điện
Yêu cầu báo giá Tải về Tài liệu sản phẩm
Cat® C18 (50 HZ)
Máy phát điện diesel Cat C18 được phát triển để đáp ứng các nhiệm vụ quan trọng của bạn với các ứng dụng phát điện dự phòng và liên tục. Tạo ra công suất điện ổn định từ 550 - 715 kVA tại tần số 50 Hz, máy phát điện Cat C18 đáp ứng tải nhanh theo tiêu chuẩn ISO 8528-5 và mang tải 1 bước 100% tải danh định. Máy phát điện C18 đạt chứng nhận tiêu thụ nhiên liệu thấp và đáp ứng tiêu chuẩn khí thải China Nonroad III.
Giá: Liên hệ 1800 599 990 (Nhánh số 0)
360
| Công suất tối thiểu | 550 kVA |
| Công suất tối đa | 715 kVA |
| Tiêu chuẩn khí thải | China Nonroad III |
| Hiệu điện thế | 380 - 415V |
| Tần số | 50 Hz |
| Tốc độ | 1500 RPM |
| Cấu hình hoạt động | Dự phòng, Liên tục |
| Mô-đen động cơ | Cat® C18 ATAAC, 6 xilanh, 4 kỳ làm mát bằng nước |
| Đường kính | 145 mm |
| Hành trình píttông | 183 mm |
| Dung tích xi-lanh | 18,13 l |
| Tỷ số nén | 14,5:1 |
| Kiểu nạp khí | Air to Air Aftercooled |
| Hệ thống nhiên liệu | Kim phun điện tử |
| Hệ thống điều khiển | Adem™A4 |
| Chiều dài tối đa | 4135 mm |
| Chiều rộng tối đa | 1989 mm |
| Chiều cao tối đa | 1906 mm |
- Cat generator set packages have been fully prototype tested
- Accepts 100% block load in one step and meetsNFPA 110 loading requirements
- Conform to ISO 8528-5 steady state and transient response requirements
- Reliable, rugged, durable design
- Field-proven in thousands of applications worldwide
- Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
- Superior motor starting capability minimizes need for oversizing alternator
- Designed to match performance and output characteristics of Cat diesel engines
- Robust Class H insulation
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
- Designed to operate in standard ambient temperatures up to 55°C (131°F)
- Contact your Cat Dealer for specific ambient and altitude capabilities
Cat Dealers provide extensive post sale support including maintenance and repair agreements. Cat dealers have over 1,800 dealer branch stores operating in 200 countries. The Cat® SOSSM program cost effectively detects internal engine component condition, even the presence of unwanted fluids and combustion by-products.
- Components used in the generator set are selected based on seamless design integration to provide the optimum performance
- The generator set is fully assembled at a Caterpillar facility following our quality guidelines
- Each generator set package is tested before leaving the Caterpillar facility
- Cat product support, including dealer service, parts and warranty covers the entire Cat power system
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Phu Thai Cat provides extensive post-sale support, including maintenance and repair agreements
AIR INLET SYSTEM
- Turbocharger
- Light duty air cleaner
- Aftercooler core
AIR INLET
- Air Cleaner
CONTROL SYSTEM
- EMCP 4.2
EXHAUST
- Exhaust flange outlet
COOLING
- Coolant drain line with valve
- Caterpillar extended life coolant
- Fan drive, battery charging alternator drive
- Radiator and cooling fan with guard
EXHAUST SYSTEM
- Stainless steel exhaust flex gaskets, raincap and SAE exhaust flange for customer use; shipped loose
FUEL
- Secondary fuel filter
- Fuel priming pump
- Primary fuel filter with integral water separator
FUEL SYSTEM
- Standard 8 hour open set fuel tank
GENERATOR
- IP23 Protection
- Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
- Matched to the performance and output characteristics of Cat engines
GENERATOR AND ATTACHMENTS
- Segregated low voltage (AC/DC) wiring panel
- Integrated Voltage Regulator
- A frame generator - IP21 protection
- Integrated Voltage Regulator
- Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre
- Power center, IP22
- Matched to the performance and output characteristics of Cat engines
POWER TERMINATION
- Bus Bar
GOVERNING SYSTEM
- Cat Electronic Governor (ADEM A4)
CONTROL PANEL
- EMCP 4 Genset Controller
LUBE SYSTEM
- Lubricating oil
- Oil drain valves
MOUNTING
- Rubber vibration isolators
MOUNTING SYSTEM
- Captive linear vibration isolators between base and engine-generator. includes lifting provisions and termination points for coolant and lube oil drain lines
STARTING/CHARGING
- 24 Volt battery with rack and cables
GENERAL
- Engine and alternator pre-paint, Caterpillar yellow
EXHAUST
- Industrial, Residential, Critical Mufflers
AIR INLET SYSTEM
- Dual element air cleaner
- Single element air cleaner
CIRCUIT BREAKERS
- 3 Pole (IEC-100% rated) circuit breakers - Motorised
- 4 Pole (IEC-100% rated) circuit breakers - Motorised
- Circuit breaker (IEC) auxiliary contacts
- Pad-lockable circuit breaker device
- 3 Pole (IEC-100% rated) circuit breakers - Package mounted
- 4 Pole (IEC-100% rated) circuit breakers - Package mounted
- Power terminal strip
- Shunt trip for IEC breaker
GENERATOR
- Anti-condensation heater
- Excitation: [ ] Permanent Magnet Excited (PM) [ ] Internally Excited (IE)
- Oversize and premium generators
POWER TERMINATION
- Circuit breakers, IEC compliant
- Circuit breakers, UL listed
CONTROL PANELS
- Local & remote annunciator modules
- Load share module
- Remote monitoring software
- EMCP (4.2) (4.3) (4.4)
- Digital I/O module
CONTROL SYSTEM
- Oil temperature displays
- EMCP 4.4
- Volt free contact
- Protective devices: Earth fault relay - earth leageage ground fault relay - Overload shutdown via breaker - Low fuel level alarm - Low fuel level shutdown - high fuel level alarm - Fuel level sensor
- Local alarm modules
- Remote annunciator modules
- Local alarm horn
COOLING SYSTEM
- Low coolant temperature alarm
- Radiator duct flange
STARTING/CHARGING
- Oversize batteries
- Jacket water heater
- Battery chargers
- Heavy-duty starting system
- Charging alternator
ENCLOSURES
- Sound attenuated enclosures
EXHAUST SYSTEM
- Manifold and Turbocharger guard
- Engine mounted muffler
- 8 and 10 inch elbow kits
- 8 and 10 inch GP flanges
- 10, 25 and 35 end in / end out Mufflers
FUEL SYSTEM
- Integral - Duel wall fuel tank base
- Manual fuel transfer pump
- Fuel transfer system
GENERATOR AND ATTACHMENTS
- LC frame generator
- Permanent magnet excitation
- LC frame oversize generators
- Space heaters
- A frame oversize generator
- A frame CIP generator
- Ingress protection
- LC frame CIP generator
GENERAL
- Single or dual wall integral fuel tanks
- UL 2200 package
- Enclosures: sound attenuated, weather protective
- EU Certificate of Conformance (CE)
- Integral & sub-base UL listed dual wall fuel tanks
- Narrow, Wide or Skid Base
- The following options are based on regional and product configuration:
- Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
- EEC Declaration of Conformity
- CSA Certification
- Sound attenuated, weather protective or high ambient weather protective enclosure
- Automatic transfer switches (ATS)
- Single or dual wall sub-base fuel tanks
LUBE SYSTEM
- Manual sump pump
STARTING AND CHARGING
- Jacket water heaters
- 5 Amp battery charger
- Battery disconnect switch
1800 599 990
Live chat