Máy ủi bánh xích Cat
Yêu cầu báo giá Tải về Tài liệu sản phẩm
D1
The new Cat® D1 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.
- EASY TO OPERATE: GRADE with 3D and Slope Assist™ helps achieve the best quality grading results, while new technologies make machine operation easier and more efficient.
- Up to 10% LOWER TOTAL OWNERSHIP COST with improved fuel economy, long undercarriage life and easy maintenance.
- Up to 15% MORE PERFORMANCE with customizable operator settings, improvements in grade control features and optimum machine balance for smooth, fast finish grading.
360
| Engine Model | Cat C3.6 |
| Power - Net | 59.7 kW |
| Displacement | 3.6 l |
| Net Power - 2,200 rpm - SAE J1349 | 59.7 kW |
| Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 | 59.7 kW |
| Note (1) | Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. |
| Note (2) | All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. |
| Power Train | Hydrostatic |
| Operating Weight | 8099 kg |
| Operating Weight - LGP | 8545 kg |
| Note (1) | Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. |
| Operating Weight - LGP, 762 mm/30 in | 8752 kg |
| Note (2) | For machine with ripper, add 554 kg (1,222 lb). |
| FOPS | ISO 3449:2005 Level II |
| ROPS | ISO 3471:2008 |
| Drive Pumps | 1 |
| Maximum Travel Speed - Reverse | 10 km/h |
| Relief Valve Settings | 48500 kPa |
| Maximum Travel Speed - Forward | 9 km/h |
| Track Motors | 2 |
| Length - Track on Ground - LGP, 762 mm (30 in) | 2248 mm |
| Length - Track on Ground - LGP | 2248 mm |
| Track Gauge - LGP | 1725 mm |
| Shoe Width - LGP, 762 mm (30 in) | 762 mm |
| Track Gauge - LGP, 762 mm (30 in) | 1860 mm |
| Shoe Width - LGP | 635 mm |
| Track Gauge | 1495 mm |
| Shoe Width - Standard | 406 mm |
| Ground Pressure - LGP | 29.9 kPa |
| Ground Pressure - LGP, 762 mm (30 in) | 25.5 kPa |
| Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage | 43 |
| Number of Rollers - Each Side | 6 |
| Length of Track on Ground | 2248 mm |
| Number of Shoes - Each Side - Abrasion Undercarriage | 38 |
| Ground Pressure | 44.5 kPa |
| Final Drive - Each - LGP | 10 l |
| Cooling System | 19 l |
| Diesel Exhaust Fluid (DEF) Tank | 19 l |
| Transmission - Hydraulic Tank | 90 l |
| Crankcase - With Filter | 10.5 l |
| Fuel Tank | 195 l |
| Final Drives - Each Side | 10 l |
| Pump Output | 65 l/min |
| Relief Valve Settings | 20600 kPa |
| Type | Parallelogram |
| Number of Shanks | 3 |
| Height | 165 mm |
| Weight | 554 kg |
| Maximum Ground Clearance Under Tip | 448 mm |
| Maximum Digging Depth | 337.5 mm |
| Overall Width | 1710 mm |
| Maximum Reach - Ground Line | 766 mm |
| Weight | 610 kg |
| Winch Drive | Hydrostatic |
| Control | Hydraulic |
| Speed | Variable |
| Drum Capacity - Optional Cable | 78 m |
| Maximum Line Speed - Full Drum | 63 m/min |
| Rope Diameter - Optional | 19 mm |
| Maximum Line Pull - Full Drum | 11340 kg |
| Maximum Line Speed - Bare Drum | 40 m/min |
| Rope Diameter - Recommended | 16 mm |
| Drum Width | 274 mm |
| Drum Capacity - Recommended Cable | 113 m |
| Maximum Line Pull - Bare Drum | 18144 kg |
| Drum Diameter | 254 mm |
| Winch Length | 705 mm |
| Throat Clearance | 171.5 mm |
| Overall Width | 741 mm |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
| BLADE: Digging Depth - Intermediate | 573 mm |
| Width - Tractor - Standard Shoes - No Blade - LGP (762 mm/30 in) | 2411 mm |
| BLADE: Blade Capacity (SAE) - LGP | 1.99 m³ |
| BLADE: Blade Lift Height - LGP | 730 mm |
| Length - Basic Tractor - Without Blade - LGP, 762 mm (30 in) | 3291 mm |
| BLADE: Maximum Tilt - LGP | 438 mm |
| BLADE: Blade Width - LGP | 3149 mm |
| Ground Clearance - LGP | 332 mm |
| BLADE: Blade Width at Maximum Angle - LGP | 2874 mm |
| BLADE: Digging Depth - LGP | 573 mm |
| BLADE: Blade Lift Height - Intermediate | 743 mm |
| Track Gauge - LGP | 1725 mm |
| Ground Clearance - LGP, 762 mm (30 in) | 332 mm |
| Width - Tractor - Standard Shoes - No Blade - LGP | 2360 mm |
| BLADE: Blade Height - LGP | 860 mm |
| Overall Length - With Blade - LGP, 762 mm (30 in) | 4262 mm |
| Track Gauge - LGP, 762 mm (30 in) | 1860 mm |
| BLADE: Blade Height - Intermediate | 860 mm |
| BLADE: Blade Cutting Edge Angle, Adjustable - LGP | 52° to 58° |
| Tractor Height - LGP, 762 mm (30 in) | 2765 mm |
| BLADE: Maximum Angle (either side) - LGP | 25° |
| BLADE: Blade Capacity (SAE) - Intermediate | 1.5 m³ |
| Length - Basic Tractor - Without Blade - LGP | 3291 mm |
| BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate | 52° to 58° |
| BLADE: Blade Width at Maximum Angle - Intermediate | 2669 mm |
| BLADE: Maximum Tilt - Intermediate | 448 mm |
| BLADE: Blade Width - Intermediate | 2921 mm |
| BLADE: Maximum Angle (either side) - Intermediate | 25° |
| Tractor Height - LGP | 2765 mm |
| Overall Length - With Blade - LGP | 4262 mm |
| Note | *Abrasion Undercarriage |
| BLADE: Blade Width at Maximum Angle - Standard | 2417 mm |
| BLADE: Digging Depth - Standard | 573 mm |
| BLADE: Blade Width - Standard | 2646 mm |
| BLADE: Blade Lift Height - Standard | 730 mm |
| Ground Clearance - Standard | 332 mm |
| BLADE: Blade Cutting Edge Angle, Adjustable - Standard | 52° to 58° |
| Tractor Height - Standard | 2765 mm |
| Length - Basic Tractor - Without Blade - Standard | 3291 mm |
| BLADE: Maximum Angle (either side) - Standard | 25° |
| BLADE: Maximum Tilt - Standard | 368 mm |
| BLADE: Blade Capacity (SAE) - Standard | 1.52 m³ |
| Track Gauge - Standard | 1495 mm |
| BLADE: Blade Height - Standard | 910 mm |
| Width - Tractor - Standard Shoes - No Blade - Standard | 1900 mm |
| Overall Length - With Blade - Standard | 4273 mm |
- New sloped hood provides better visibility to the work in front of the blade as well as the overall job site. Better visibility can equal less operator fatigue and more confidence in your work.
- Scalable 2D and 3D Cat Grade provide technologies like Slope Assist, Stable Blade, and Slope Indicate for easier and more efficient operation, as well as the flexibility to adapt different technology based on job site demands.
- The D1 features the lowest fuel consumption in this size class with the same great performance you've come to expect. Up to 20% improvement and no performance sacrifice when ECO mode is active.
- The spacious and comfortable cab features an optional heated and ventilated seat, along with heated joystick controls to make the operator comfortable no matter what the conditions are outside. The seat height and armrests can be easily adjusted to the operator’s preference.
- This new and improved optional 10 in (254 mm) touchscreen, color display is easy to use, with a great view of machine settings, rearview camera and Slope Indicate/Slope Assist screens. The large reversing camera gives the operator better visibility to the job site.
- The D1 is available with either a Sealed and Lubricated Track (SALT) or Abrasion undercarriage to best suit your application. The undercarriage has a longer life resulting in less down time. A one piece mainframe/track roller frame design and the large, double reduction planetary final drive allow the machine to push heavy loads.
POWER TRAIN
- Air cleaner with precleaner, automatic dust ejection and underhood intake
- Aluminum bar plate cooling system (radiator, power train)
- Automatic traction control
- Cat C3.6 diesel engine
- Drive, auxiliary
- Dual path, closed loop, hydrostatic transmission
- Electric fuel pump
- Fuel/water separator
- Turbocharged aftercooled
ELECTRICAL
- Alarm, backup
- Alternator, 150 amp, heavy duty
- Batteries, heavy duty, maintenance free, 1,000 CCA
- Diagnostic connector
- Four integrated front halogen lights, two rear halogen
- Horn, electric
- Starter, electric, 12 V, heavy duty
UNDERCARRIAGE
- SALT undercarriage (43 section)
- Carrier rollers
- Guards, front/rear guiding
- Six roller track frame
- Track adjusters, hydraulic
- Track rollers, lifetime lubricated
HYDRAULIC
- Hydraulic pump and oil
- Single lever, three function control
- Three valve hydraulics
CAT TECHNOLOGY
- Cat Product Link PLE643/PLE743 Cellular
- Slope Indicate
- Stable blade
ATTACHMENTS
- Rigid drawbar
- Front pull device
OPERATOR ENVIRONMENT
- Armrests, adjustable
- Coat hook
- Controls, seat mounted, fore/aft adjustment
- Cup holders
- Eco mode
- Electronic Monitoring system with gauge:
– Chassis slope indication
– Diesel exhaust fluid (DEF)
– Engine coolant temperature
– Fuel level
– Hydraulic oil temperature - Electronic security system
- Engine air cleaner service indicator
- Engine RPM and gear display
- Floor mat, rubber, heavy duty
- Foot pads, dash
- Hour meter, electronic
- Independent forward/reverse speed settings
- Mirror, rearview, inside
- Power port, 12 volt
- ROPS/FOPS canopy
- Seat, air suspended, cloth or vinyl
- Seatbelt, hi-vis retractable 76 mm (3")
- Seatbelt buckling indicator/reminder
- Single pedal combining decel and brake functions
- Speed recall
- Storage compartment
- Throttle switch, rotary
- Travel speed limiter, electronic
POWER TRAIN
- Air cleaner with external precleaner
- Installation, winch
ELECTRICAL
- Four integrated front LED lights, two rear LED
UNDERCARRIAGE
- Abrasion undercarriage (38 section)
- Track Pairs
– Track, 406 mm (16 in)
– Track, 635 mm (25 in)
– Track, 762 mm (30 in)
HYDRAULIC
- Four valve for use with ripper
- Four valve for use with winch
CAT TECHNOLOGY
- Cat GRADE with Slope Assist
- Cat GRADE with 3D
- Cat Product Link PLE683/PLE783 Cellular/Satellite
- Full-color 10 in (254 mm) touchscreen grade display
- Power Pitch
ATTACHMENTS
- Drawbar, towing
- Machine security system
- Mounting, winch
- Ripper, parallelogram, includes three shanks and teeth
- Winch, hydraulic, high performance
- Winch, hydraulic, retrieval
OPERATOR ENVIRONMENT
- Cab, with air conditioning
- Cab, polycarbonate windows and air conditioning
- Radio, AM/FM Bluetooth®
- Seat, air suspension, choice of:
– Vinyl, heated seat with heated controls
– Cloth, heated seat with heated controls
– Cloth, heated and ventilated seat with heated controls - Sound suppression
OTHER
- Heater, engine, coolant 120 V/240 V
- Starting aid, ether
Nội dung liên quan
1800 599 990
Live chat