C7.1
| Dải công suất | 298 bkW - 373 bkW (400 bhp - 500 bhp) |
| Kiểu nạp khí | Turbocharged, aftercooled |
| Đường kính | 105.0 mm |
| Cấu hình | In-line 6, 4-Stroke-Cycle Diesel |
| Dung tích xylanh | 7.01 l |
| Tiêu chuẩn khí thải | EPA Tier 3, IMO II, RCD 2016 |
| Rotation from Flywheel End | Counterclockwise |
| Tốc độ động cơ | 2900 rpm |
| Hành trình píttông | 135.0 mm |
| Khối lượng động cơ (gần đúng) | 750.0 kg |
| Chiều cao | 876.0 mm |
| Chiều dài - Động cơ | 1394.0 mm |
| Chiều rộng - Động cơ | 798.0 mm |
Superior response time and acceleration for better maneuverability and safety; Grid heater for improved cold weather starting; Electrical advantages with 12V or 24V electrical system; Highest standard paint quality
Compatible with Cat® Displays to monitor all vessel operations; Available engine-mounted display panel with start, stop, and engine diagnostic; Single access point improves serviceability; Wiring harnesses with a woven cover provide more attractive serviceable compenents; gplink ready for remote monitoring
No visible smoke on start up or underway; The common rail fuel system enables optimum combustion and low emissions; Reduced combustion noise through advanced electronic control; Closed crankcase ventilation system improves engine room cleanliness; Electronically controlled supercharger provides industry-leading torque and throttle response at low speeds, while maintaining fuel efficiency at high speeds
AIR INLET SYSTEM
- Air cleaner/fumes disposal (closed system)
- Turbochargers, jacket water cooled
- Aftercooler condensate drain
CONTROL SYSTEM
- Cold mode start strategy
- PWM secondary throttle
- Cold mode start strategy
- Electronic diagnostics and fault logging
- Engine and transmission monitoring (temperature, pressure)
- Electronic fuel/air ratio control
- Engine Protection Mode for extended ambient conditions
- Three types of throttle inputs (CAN, PWM, and 0-5V)
- 70-pin customer connector
COOLING SYSTEM
- Sea water pump, gear driven, for HEX cooled engines only
- Sea water aftercooled
- Jacket water pump, gear driven
- JW Heat Exchanger - Corrosion resistant shell and tube style
- Fuel cooler
- Expansion tank
- Thermostat housing
- 63mm hose bead raw water inlet
- 50 mm hose bead raw water oulet
- Integrated gear oil cooler
EXHAUST SYSTEM
- Water-cooled exhaust manifold & turbocharger
- 90mm ID round flanged exhaust outlet
FLYWHEELS & FLYWHEEL HOUSINGS
- Flywheel Housing, SAE No. 3 - With M10 Threads
- Flywheel, SAE 11 1/2, with 3/8 UNF threads
- SAE standard rotation
FUEL SYSTEM
- High Pressure Common Rail fuel system
- High pressure fuel system pump with integral low pressure fuel transfer pump
- Primary fuel filter, remote mounted
- Secondary fuel filter, LH top service location
LUBE SYSTEM
- Crankcase breather, closed crankcase ventilation
- Oil filter, LH top service location
- Oil cooler
- Oil pan, center sump
- Oil pump, gear driven
- Dipstick, RH service on Port, LH service on Starboard
MOUNTING SYSTEM
- Front and rear support brackets
GENERAL
- Front belt and damper guard
- Lifting eyes
- Upper front-facing customer wiring connector and Service Tool connection
PROTECTION SYSTEM
- Electronic Engine Monitoring System provides engine de-rate strategies to protect against adverse operating conditions
PAINTS
- Engines are painted Matterhorn white with pleasure craft finish includes epoxy primer with polyurethane topcoat. Fuel lines, water lines and clamps and wiring harness will be unpainted. Standard decals and informational films will be installed. Shipped lo
CONTROL SYSTEM
- Instrument Panels
INSTRUMENTATION
- Transmission Sensors
MOUNTING SYSTEM
- Vibration isolation mounting
