Extensive service network of dealers; Unparalleled service from authorized marine dealers

Proven engine operating history; Performance iron with thousands of hours of validation testing for quality and durability

60 months standard warranty

Heat Exchanger or Keel Cooling; Heat exchanger configurations: optional front mounted sea water pump

Separate circuit aftercooling system (SCAC): no seawater circulating through the aftercooler

• If an EMCP panel or MGCP option is not chosen as optional equipment, then start/stop controls must be provided by the customer
• Electronic diagnostics and fault logging
• Engine Protection Mode for extended ambient conditions
• Electronic fuel/air ratio control

• Separate Circuit After-Cooling (SCAC) for Heat Exchanged (HEX) & Keel cooled engines
• Jacket Water (JW) and SCAC Heat Exchangers Shell & Tube for HEX cooled engines
• SCAC pump, gear driven
• Jacket water pump, gear driven
• Sea water pump, bronze impeller, gear driven, for HEX cooled engines only
• Jacket water HEX with Sea water pump Connections: 76.2 mm (3in) ID Standard
• 4 Bolt ANSI Flange Connection
• Jacket water HEX without Sea water pump Connection: 2.5" hose barb connection (inlet), 76.2 mm (3in) ID Standard 4 Bolt ANSI Flange (outlet)
• Keel Connections: 76.2 mm (3in) ID Standard 4 Bolt ANSI Flange Connection
• SCAC and JW shunt tanks for maintaining proper Pump inlet pressures

• Water-cooled exhaust manifold & turbocharger
• 4 Bolt 130 mm (5.12 in) diameter flanged outlet

• Flywheel Housing, SAE No. 0
• Flywheel, 18 inch, 136 teeth
• SAE standard rotation

• Duplex Fuel Filters, Spin-on, RH service
• Fuel connections size: Supply JIC 37 Deg -10 (7/8-14), Return JIC 37 Deg -8 (3/4-16)
• Plate-type fuel cooler installed behind Aftercooler Shunt Tank
• Fuel transfer pump, gear driven
• Manual fuel priming pump

• SR5 form wound
• 2 roller bearings
• Permanent magnet excitation
• 4 pole, 6 leads, Series Star connected
• Caterpillar's Digital Voltage Regulator (CDVR)
• Marine Class H insulation, Class F temperature rise
• Surface mounted platinum (PT100) 3-wire RTDs, 2 per phase on stator and one each on support bearings
• Anti-condensation space heaters (2 elements - 240 VAC, 1000 Watts
• IP23 Protection suitable for use with Fixed Water Based Local Application Fire Fighting Systems (FWBLAFFS)
• System IV insulation for harsh environment protection

• Simplex oil filters, RH service
• Deep sump oil pan
• RH service oil filler locations
• RH service dipstick
• Oil pump, gear driven

• Formed C-channel rails, 300mm (11.81in) height
• Six shipped loose combined helical spring/rubber
• isolators for installation below package base

• Front Damper guard
• Common electrical bondng point on HEX and KEEL cooled engines

• Remote panels
• MCS Controller
• Power analyzer module
• Oil level, exhaust temperature, air starting pressure, heat exchanger pressure sensors

• Dry Elbows
• Flexible Fitting
• Flange
• Muffler
• Muffler Spark Arresting
• Rain Cap

• Air Inlet Cleaner
• Closed Crankcase Ventilation
• Air inlet adapter

• Battery Chargers, Charging Alternators

• Load Sharing Attachment

• Water Separator

• Duplex Oil Filters, Sump Pump

• Fuel and Oil Shielding

• Electric Starting Motors - Single 24 Volt
• Air Starting Motor
• Dual Starting Motors (Electric and Air)
• Air Start Accessories
• Starting Aids - JW Heaters
• Battery Sets - 24 Volt - Dry