Máy phát điện tàu thủy
Yêu cầu báo giá Tải về Tài liệu sản phẩm
C18 (SRMP)
The C18 SRMP is the latest generator and brings commonality with our petroleum products as well as interfacing improvements. We have also taken this opportunity to add new price list options. All engine ratings and emissions certifications are the same, however we have been able to increase the power output of the generator for 12 of the 14 ratings.
360
| Công suất tối thiểu | 260 ekW (325 kVA) |
| Công suất tối đa | 565 ekW (706 kVA) |
| Tần số | 50 hz |
| Tốc độ | 50 Hz - 1500 rpm, 60 Hz - 1800 rpm |
| Cấu hình | In-line 6, 4-Stroke-Cycle Diesel |
| Kiểu nạp khí | Turbocharged - aftercooled |
| Đường kính | 145.0 mm |
| Hành trinhg píttông | 183.0 mm |
| Hệ thống nhiên liệu | MEUI |
| Tiêu chuẩn khí thải | EPA Tier 3, IMO II, EU IW |
| Height | 1648.0 mm |
| Length | 3038.0 mm |
| Weight - Approximate | 4221.0 kg |
| Width | 1411.0 mm |
| Chiều cao | 2408.0 mm |
| Chiều dài | 4741.0 mm |
| Khối lượng - Gần đúng | 6076.0 kg |
| Chiều rộng | 1699.0 mm |
| Excitation | SRMP |
| Insulation | Class H |
| IP Rating | IP23 (standard), IP 44 (optional) |
| Voltage Regulator | CDVR (Digital Voltage) |
The primary advantage of the separate circuit aftercooling system (SCAC) is that no sea water circulates through the aftercooler
EPA Tier 3 compliant, IMO II and EU IWW compliant
Heat exchanger and Keel cooled options for all ratings
Single turbo configurations for all ratings
All major MCS type approvals available from factory
- Separate circuit after-cooled (SCAC)
- Heavy-duty inlet air filter
- SCAC pump, gear driven, for HEX cooled engines only
- Jacket water pump, gear driven
- SCAC and JW shunt tanks for maintaining proper pump inlet pressures
- Water-cooled exhaust manifold & turbocharger
- Round flanged exhaust outlet
- Hybrid fuel lines
- MEUI™ fuel system
- Fuel filter, front service
- Fuel transfer and priming pumps
- Center sump oil pan, deep
- Front and top service oil filler locations
- Front service dipstick
- Vibration Isolators
- Formed C-channel rails
- Electronic fuel/air ratio control
- SRMP permanent magnet 12-lead generator
- Digital voltage regulator
- Class H insulation, Class F temperature rise, IP23 protection
- Dry Elbows
- Water-Cooled Elbows
- Flexible Fitting
- Flange
- Muffler
- Muffler, Spark Arresting
- Fumes disposal (closed system)
- Air Inlet Adapter
- Battery Chargers 10 amp
- Battery sets: 24V 950-1300 CCA
- Charging alternator 24V 105 amp
- Caterpillar alarm and protection
- EMCP 4.2 control panel
- MGCP III B control panel
- Duplex fuel filter – front service
- Fuel cooler
- Primary fuel/water separator
- Generator service side - LH, RH
- Generator terminal box extension
- Load sharing module (option for type approved module)
- Spare pump kits
- Duplex oil filter – front service
- Manual sump pump
- Vibration Isolators
- Generator protection - IP44
- Starting motors - electric and/or air
- Jacket water heaters
1800 599 990
Live chat